Accessory - Clogged Filter Switch
Summary:
This accessory kit detects static pressure differentials across the filters to indicate a clogged or dirty filter condition. When it detects such a filter problem, the Symbio 700 will annunciate a filter change required alarm.
Note:
- A Fresh Air Options Module (FIAOPTN002*) must be installed in the unit for this accessory to operate.
- After installation is complete, the Symbio 700 UC module configuration will need to be updated to enable this installed accessory.
| Model Number: | Used With: |
| FIACLFS001* | 6 to 12.5 Tons, Standard or MERV8 filters, B/C cabinet (digit 39=B/C) |
| FIACLFS002* | 6 to 12.5 Tons, MERV13 filters, B/C cabinet (digit 39=B/C) |
| FIACLFS003* | 12.5 to 25 Tons, Standard or MERV8 filters, D cabinet (digit 39=D) |
| FIACLFS004* | 12.5 to 25 Tons, MERV13 filters, D cabinet (digit 39=D) |
Introduction:
Read this manual thoroughly before operating or servicing the unit. Click the e-library image below to download the latest PDF of the Clogged Filter Switch Guide.
Click the e-library symbol for the latest version of the installation guide
Wiring:
- Using the control harness included in the kit, connect PPF86 from the harness to the connector on the clogged filter switch.
- Route harness up the right side of the return enclosure and through the opening where factory wires lead to the fresh air module inside of the enclosure.
- Connect J15 of harness to P15 on fresh air module.
- Secure the harness with factory-installed wire ties using the releasable feature on each wire tie.
More Information:
Click the link below
Symbio 700 Fresh Air Options Module Installation Guide and Configuration
WARNING:
Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.