Modulating gas heat manuals
Summary:
These documents are intended to inform the field on how to properly set the modulating gas valve on Voyager II and Voyager III units. If the procedure below is not followed, the unit may not burn properly and, under some circumstances, may be noisy. The setting of the gas valve is temperature-sensitive, so follow the procedure closely.
Please take a look at the attachment manuals below for troubleshooting the Combustion fan motor board, Fan, and startup.
WARNING:
Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.