Table of Contents
Reference Enthalpy
Used With
| Model Number: | Used With: |
| FIAENTH001* | 3 to 25 tons with Symbio™ controls |
Installation Instructions
Click the e-library symbol for the latest version of the Reference Enthalpy Installation Instructions.
Sensor Location
- There are different locations for different unit models. Please reference the installation module.
Wiring
- Route the provided harness from the sensor to red plug P9 on the Fresh Air Options Module
Fresh Air Options Module Location
WARNING:
Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.