Issue:
Operator display goes dim.
Resolution:
Measure 24Vac
Push on the operator display to see if it is a poor connection between the display and the main board.
Connect to the Tracker/CCP with the appropriate software to see if the main board is working.
Install display on another CCP panel to see if it follows the display or the panel.
Replace main board or display if it not a power or connection issue.
Â
Other Question/Problem/Cause Statements:
- Operator display goes dim.
Facts:
- VariTrac III Central Control Panel (CCP)
Original wave: wave10776
Document Identifier: DOC-85640
Document Identifier: 85640