The default cooling setpoint high and low limit must be at least 10°F apart.Â
The default heating setpoint high and low limit must be at least 10°F apart.
If either of these pairs of limits are not at least 10°F apart, the CCP will not
accept default setpoint changes from the Tracker or other parent system
controller.
Setpoint limit changes made at CCPIII will take priority over changes made at Tracker.
The range for changing setpoint limits through the Tracker display will be limited by the settings made from the CCPIII display.
The default setpoints set at the CCP III will take priority over changes made
to the UCM with Rover.
Â
Document Identifier: DOC-110066
Document Identifier: 110066