System air balancing for the VariTrac CCP III

Issue:

System air balancing for the VariTrac CCP III

Resolution:

 

System balancing can't be done at the Tracker front panel.

You need the CCP front panel and/or software to drive the boxes open and closed. The CCP software is needed for entering the Measured Flow. The CCP software is free with each CCP and can be copied for others in the office. If you need a panel, you could remove the one from the Tracker and place it on the CCP.

If you want to use Rover to balance the system, you must first power down the CCP. If the CCP is still online when you connect with Rover, the system will go into a priority shutdown and turn off the Voyager fan. It's best to use the VariTrac software to do the system balancing.

 

Notes:

 

Changes:

 

Other Question/Problem/Cause Statements:

• System balancing for the VariTrac CCP III
• System balancing with Tracker front panel - can it be done?
• System balancing at VariTrac III front panel - can it be done?
• Voyager fans turn off when connecting Rover
• CCP III goes into priority shutdown when trying to balance with Rover 
• Air balance ccpiii

Facts:

• Tracker BMTK
• VariTrac III Central Control Panel (CCP)
• Rover Service Software

Original wave: wave2909