Can I override the bypass damper on the CCPIII?

Issue:

Can I override the bypass damper on the CCPIII?

Resolution:

You can override the bypass damper position from the VariTrac software connected directly to the CCPIII panel.

1. From the Setup menu, choose Panel Setup.
2. Click the Field Service tab.
3. From the Enable Self Tests list, choose Enable. Click OK on the warning.
4. Use the Command Bypass Position slider to adjust the bypass position (0100%).

Do not use Rover to override the bypass damper while the CCP is on the link. Rover and the CCP will fight each other to control the devices.

 

Other Question/Problem/Cause Statements:

• Can I override the bypass damper on the CCPIII?
• can we manually drive the bypass damper from the CCP?
• How to test the bypass damper on CCP III?
• Can I use Rover to override the bypass damper?

Facts:

• VARITRAC III CENTRAL CONTROL PANEL (CCP)
• VariTrac III Central Control Panel (CCP)
• Varitrac Software

Original wave: wave51955