Issue:
BMTK Tracker - Can I set the energy saver mode from the Operator Display?
Resolution:
The Energy Saver mode is a feature of a CCPIII changeover bypass system and Yes it can be enable/disabled via the BMTK Tracker Operator display. From the Operator display of the BMTK Tracker:
1. Select the Advanced Button
2. Select HVAC Equipment
3. Select CCPIII
4. Select Groups --> Specific group
5. Select Setup
6. Select Energy Saver mode
Other Question/Problem/Cause Statements:
- BMTK Tracker - Can I set the energy saver mode from the Operator Display?
Facts:
- Tracker BMTK
- VariTrac III Central Control Panel (CCP)
Original wave: wave24362
Document Identifier: DOC-86030
Document Identifier: 86030