Issue:
Fan Cycling vs. Continuous
Resolution:
Cycling the fan during occupied periods will only bring fan on when there is a call for heating or cooling from any of the zones. The fan is off when all zones are satisfied. Usually fan is set to run continuos during occupied periods. In some residential applications, the fan may be setup to cycle when zones are satisfied, much like a home furnace system.
Â
Other Question/Problem/Cause Statements:
- Why setup fan to cycle instead of run continuously?
- Can I set the fan to cycle on a CCP system?
Facts:
- VARITRAC III CENTRAL CONTROL PANEL (CCP)
- VariTrac III Central Control Panel (CCP)
Original wave: wave7283
Document Identifier: DOC-82333
Document Identifier: 82333