How can relative humidity be made available to Tracker

Issue:

How can relative humidity be made available to Tracker

Resolution:

ZN517:

Analog Input 1 on the ZN517 must be configured for relative humidity with Rover.  This can not be done with Tracker.

The sensor value can be used in Binary Output Programming.  The property name is:  "Space Humidity:  Input"

Relative Humidity will be displayed on the ZN517 Edit page in Tracker software.  It will not be displayed on the Operator Display. 

MP503:

Universal Input on MP503 can be configured for relative humidity.

Voyager SCC with LCI-R:

Will be displayed in editor for the voyager in the pc software.  Will not be displayed on operator display.

 

 

Notes:

 

Changes:

 

Other Question/Problem/Cause Statements:

• Can I use a humidity reading from the ZN517 to control a binary output on the MP503 using Tracker?
• Can I see the space humidity on the Tracker from the ZN517
• How can relative humidity be made available to Tracker

Facts:

• TRACKER BMTK
• Tracer MP503
• Tracer ZN517
• Tracker BMTK

Original wave: wave667