Issue:
EMTK security
Resolution:
Setting up security in a EMTK tracker is done through the RS232 connection. Currently you can use HyperTerminal to do this. If security is enabled, you can chosse to disable any set-up functions at the local interface and thus you will see the "Access Denied" dialog when you try to adjust a setpoint..
Notes:
Changes:
Â
Other Question/Problem/Cause Statements:
- Access denied when trying to set the setpoint in the Tracker 7.0
Facts:
- TRACKER EMTK
- Tracker EMTK
Original wave: wave64705
Document Identifier: DOC-102884
Document Identifier: 102884