Issue:
Fan failure reset in CCP
Resolution:
This is how it currently works. If you clear a fan-failure diagnostic in Tracker software or from the Tracker front panel, it will clear out the alarm from the Tracker and set it to normal and clear the alarm from the CCP if you have a display. The unit will not attempt a restart unless you cycle power on the unit or click on the reset diagnostic at the CCP local display.
Notes:
Changes:
Other Question/Problem/Cause Statements:
-
Reset fan failure diagnostic from the Tracker panel but it doesn't reset the unit.
-
I reset the fail failure diagnostic in Tracker software and the diagnostic is cleared in the CCP but the fan does not try to restart
Facts:
- Tracker BMTK
- VariTrac III Central Control Panel (CCP)
Original wave: wave45427
Document Identifier: DOC-95004
Document Identifier: 95004
Â