Summit and Tracker remote communication

Issue:

Summit and Tracker remote communication.

Resolution:

Summit only supports communication to EMTK Tracker v5 and V6.

Summit will not connect to a BMTK V10, V11 or V12.

Need to set up configuration for T100/Tracker on Tracer Summit. For Tracer 100 and Tracker sites, initialization String 2 should be used to disable error control and data compression. If you have a US Robotics modem, the command should be AT&K0&M0. (Use zeros not the letter O.) If you don't have a US Robotics modem the string command may be different.

Notes:

Changes:

Other Question/Problem/Cause Statements:

• Summit and Tracker remote communication.
• Unable to dial a Tracker V12 panel with Tracer Summit.
• Summit dial out to EMTK Tracker
• Modem strings to dial-up EMTK Tracker from Tracer Summit

Facts:

• Tracer Summit (Windows)
• Tracker EMTK
• Tracker BMTK

Original wave: wave8305