Issue:
Why is the Tracker is not talking to the Voyager?
Resolution:
Check addressing on the TCI card. Verify that it matched the old 1. First 5 dip switches on the new TCI card must match the dip switch 2-6 on the old card.
Notes:
Changes:
Other Question/Problem/Cause Statements:
- Why is the Tracker is not talking to the Voyager?
Facts:
- TRACKER EMTK
- TCIÂ board in the Voyager was just replaced.
- New TCI card only had 5 dip switches.
- Daughter card in the Voyager was set to Isolated comm 3.
- Tracker EMTK
Original wave: wave5245
Document Identifier: DOC-82179
Document Identifier: 82179