Symbio™ 700: How to Edit and Apply Unit Configuration (Mobile App, Onboard Display, & Tracer TU) – Trane Commercial HVAC Help Center

Configuration Program

Precedent

Some items may differ; it depends on the firmware version.

Precedent Symbio 700 Configuration

Enter your model number to retrieve the configurations

Unit Items	Configuration Item

Foundation

Some items may differ; it depends on the firmware version.

Foundation Symbio 700 Configuration

Enter your model number to retrieve the configurations

Unit Items	Configuration Item

Odyssey

Some items may differ; it depends on the firmware version.

Odyssey Symbio 700 Configuration

Enter your model number to retrieve the configurations

Unit Items	Configuration Item

Phone App Download Link

Steps for downloading the phone app.

Configuring with Phone App

From the Home Page, go to the Setting Icon
Click the View Configuration tab
- This page does not auto-refresh; to manually refresh, swipe down or press refresh
To edit the configuration, press the Edit button on the next window; you'll see (Stopping the Equipment) press the Proceed button and start the equipment configuration.

Configuring with the Onboard Symbio Display

How to use the Onboard Display to Configure or Edit Configuration

Configuring with Trane Tracer TU

Symbio 700 Using Trane Tracer TU to Edit or Configure

Configuration Tables

Precedent

The table below outlines the Symbio™ 700 configuration and available options for the Precedent. Use the unit’s model number to determine the appropriate selections for configuring the unit controller.

Configuration Item	Configuration Option	Model Number (Reference)	Description
System Type	CZVT	Digit 15 = 0, 1	Constant Volume Zone Temperature control, provides discrete supply fan speeds at heating and cooling capacities. Select CVZT when the equipment is controlled from a conventional thermostat or a zone sensor.
	VVZT	Digit 15 = 2, 3	Variable Volume Zone Temperature control, also known as single zone VAV, modulates the supply fan with capacity providing space temperature control to a space.
	VVDA	Digit 15 = 4, 5	Variable Volume Discharge Air control, also known has multi-zone VAV, provide supply fan duct static pressure
Space Controller	Conventional T-Stat	Not applicable	Equipment is being controlled from a conventional thermostat in the space.
Indoor Fan Type	Multi Speed	Digit 2 = H, Z Digit 4, 5, 6 = 036, 048, 060 Digit 15 = 0, 1	High or Ultra-High efficiency, 3 to 5 ton unit with a standard or oversized supply fan motor.
	Multi Speed	Digit 4, 5, 6 = 072 to 300 Digit 15 = 0, 1	6 to 25 ton unit with a standard or oversized supply fan motor.
	Single Speed	Digit 2 = S Digit 4, 5, 6 = 036, 048, 060	Standard Efficiency, 3 to 5 Ton unit.
	Variable Speed	Digit 15 = 2, 3, 4, 5	Single zone variable air volume supply fan (VVZT) or True VAV supply fan (VVDA).
Indoor Fan VFD (Precedent only)	EBM Papst	Digit 4, 5, 6 = 072 to 300	Tonnage is 6 to 10 ton.
		Digit 1, 2 = WH, DH Digit 4, 5, 6 = 036	High efficiency, heat pump, dual fuel, 3-ton unit.
		Digit 2 = Z Digit 4, 5, 6 = 036	Ultra-High efficiency, 3-ton unit.
		Digit 2 = H, Z Digit 4, 5, 6 = 048, 060	High or Ultra-High efficiency, 4-ton or 5-ton unit.
	Mitsubishi	Digit 4, 5, 6 = 072, 090, 102, 120 Digit 8 = 3, 4	Tonnage is 6, 7.5, 8.5, 10 and Voltage is 208/230/60 or 460/60.
Refrigeration System	Cooling Only	Digit 1 = T – DX Cooling Y – DX Cooling, Gas Heat	Direct expansion cooling unit with or without primary heating capacity.
Refrigeration System	Heat Pump	Digit 1 = W, D, G	Heat Pump (W), Dual Fuel (D), or Axiom Rooftop Water Source Heat Pump (G).
Heat Pump Type	Air Source	Digit 1 = W, D	Air cooled condenser (Precedent Heat Pump)
Heat Pump Type	Water Source	Digit 1 = G	Water cooled condenser (Axiom Rooftop Water Source Heat Pump).
Refrigerant	R-410A	Digit 3 = J	Equipment designed for R-410A.
Refrigerant	R-454B	Digit 3 = K	Equipment designed for R-454B.
Tonnage (60 Hz)	3	Digit 4, 5, 6 = 036	Designates the equipment capacity in tons of cooling.
	4	Digit 4, 5, 6 = 048
	5	Digit 4, 5, 6 = 060
	6	Digit 4, 5, 6 = 072
	7.5	Digit 4, 5, 6 = 090
	8	Digit 4, 5, 6 = 102
	10	Digit 4, 5, 6 = 120
	12.5	Digit 4, 5, 6 = 150
	15	Digit 4, 5, 6 = 180
	17.5	Digit 4, 5, 6 = 210
	20	Digit 4, 5, 6 = 240
	25	Digit 4, 5, 6 = 300
Refrigeration Circuit	Single	Digit 2 = S, H Digit 4, 5, 6 = 036, 048, 060	Standard or high efficiency, 3 to 5 ton units.
	Single Manifold	Digit 2 = S, H Digit 4, 5, 6 = 072 to 300	Standard or high efficiency, 6 to 25 ton units.
	Single Manifold	Digit 2 = Z Digit 4, 5, 6 = 036 to 300	Ultra-high efficiency, 3 to 25 ton units.
Voltage (60 Hz)	208/230/60	Digit 8 = 3	208Vac or 230Vac, 60Hz.
	460/60	Digit 8 = 4	460Vac, 60Hz.
	575/60	Digit 8 = W	575Vac, 60Hz.
Efficiency	Standard	Digit 2 = S	Standard Efficiency.
	High	Digit 2 = H	High Efficiency.
	Ultra High	Digit 2 = Z	Ultra-High Efficiency.
Hot Gas Reheat	Not Installed	Digit 22 = 0	Standard refrigeration system.
Hot Gas Reheat	Modulating	Digit 22 = A	Modulating hot gas reheat installed.
Dehumidification Control	Humidistat	Not applicable	Dehumidification will be initiated based on a Humidistat binary input when modulating hot gas reheat is installed.
	Relative Humidity	Not applicable	Dehumidification will be initiated based on a Space Relative Humidity when modulating hot gas reheat is installed.
	Dew Point	Not applicable	Default setting when modulating hot gas reheat is installed. Dehumidification will be initiated based on a Space Dew Point and Outdoor Air Dew Point.
Primary Heating Source	Not Installed	Digit 1 = T Digit 11 = 0	No primary heating installed.
	Electric	Digit 11 = B, C, E, G, J, K, N, P, R	Cooling only unit with primary electric heat installed.
	Gas	Digit 1 = Y	Cooling only unit with primary staged or modulating gas heat installed.
	Heat Pump	Digit 1 = W, D, G
Primary Heating Type	Staged	Digit 10 = 0, A, C and Digit 11 = B, C, E, G, J, K, N, P, R, L, M, H	Staged electric heat or staged gas heat installed.
Primary Heating Type	Modulating	Digit 10 = B	Modulating gas heat installed.
Primary Heating Capacity (Primary Heating Type = Modulating)	80 MBh Low Heat	Digit 4, 5, 6 = 072 (6 ton) Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for 6-ton units.
	150 MBh High Heat	Digit 4, 5, 6 = 072 (6 ton) Digit 10 = B (modulating gas heat) Digit 11 = H (high gas heat)	High heat modulating gas option for 6-ton units.
	120 MBh Low Heat	Digit 4, 5, 6 = 90, 102 (7.5, 8.5 ton) Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for 7.5-ton or 8.5-ton units.
	200 MBh High Heat	Digit 4, 5, 6 = 90, 102 (7.5, 8.5 ton) Digit 10 = B (modulating gas heat) Digit 11 = H (high gas heat)	High heat modulating gas option for 7.5-ton or 8.5-ton units.
	240 MBh High Hea	Digit 2 = S, H (standard, high) Digit 4, 5, 6 = 120 (10 ton) Digit 10 = B (modulating gas heat) Digit 11 = H (high heat)	High heat modulating gas option for standard or high efficiency, 10-ton units.
	150 MBh Low Heat	Digit 2 = Z (ultra-high efficiency) Digit 4, 5, 6 = 120 (10 ton) Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for ultra-high efficiency, 10-ton units.
		Digit 2 = S (standard) Digit 4, 5, 6 = 150 (12.5 ton) Digit 3 = K (R-454B) Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for standard efficiency, 12.5-ton units with R-454B refrigerant.
		Digit 2 = S, H (standard, high) Digit 4, 5, 6 = 150 (12.5 ton) Digit 3 = J (R-410A) Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for standard or high efficiency, 12.5- ton units with R-410A refrigerant.
	250 MBh High Heat	Digit 2 = Z (ultra-high efficiency) Digit 4, 5, 6 = 120 (10 ton) Digit 3 = K (R-454B) Digit 10 = B (modulating gas heat) Digit 11 = H (high gas heat)	High heat modulating gas option for ultra-high efficiency, 10-ton units with R-454B refrigerant.
	250 MBh High Heat	Digit 4, 5, 6 = 150 (12.5 ton) Digit 10 = B (modulating gas heat) Digit 11 = H (high gas heat)	High heat modulating gas option for standard, high, ultra-high efficiency, 12.5-ton units.
	250 MBh Low Heat	Digit 4, 5, 6 = 180, 210, 240, 300 Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for standard, high, ultra-high efficiency, 15, 17.5, 20, 25-ton units.
	400 MBh High Heat	Digit 4, 5, 6 = 180, 210, 240, 300 Digit 10 = B (modulating gas heat) Digit 11 = H (high heat)	High heat modulating gas option for standard, high, ultra-high efficiency, 15, 17.5, 20, 25-ton units.
Primary Heating Stages	1	Digit 11 = B, C or Digit 4, 5, 6 = 120, 150, 180, and Digit 11 = G	1-stage electric heat installed.
	2	Digit 10 = A or Digit 11 = E, J, K, P, R or Digit 4, 5, 6 = 072, 090, 102, and Digit 11 = G	2-stage electric heat or staged gas heat installed.
	Full	Digit 1 = W, D	Heat Pump (W) or Dual Fuel (D) units will set Primary Heating Stages = Full.
Secondary Heating Source	Electric	Digit 1 = W, G Digit 11 = B, C, E, G, J, K, N, P, R	Heat Pump (W) units with secondary electric heat.
	Gas	Digit 1 = D	Dual Fuel (D) units.
	Not Installed	Digit 10 = 0, and Digit 11 = 0	Heat Pump (W) units with no secondary/auxiliary heat.
Secondary Heat Type	Modulating	Digit 10 = B (Modulating)	Dual Fuel (D), 6 to 25 ton units with modulating gas heat.
Secondary Heat Type	Staged	Digit 10 = 0, A, C or Digit 11 = B, C, E, G, J, K, N, P, R	Heat Pump (W) units with staged electric heat. Dual Fuel (D) units with staged gas heat.
Secondary Heating Capacity	80 MBh Low Heat	Digit 4, 5, 6 = 072 (6 ton) Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for 6-ton dual fuel units.
	150 MBh High Heat	Digit 4, 5, 6 = 072 (6 ton) Digit 10 = B (modulating gas heat) Digit 11 = H (high gas heat)	High heat modulating gas option for 6-ton dual fuel units.
	120 MBh Low Heat	Digit 4, 5, 6 = 90, 102 (7.5, 8.5 ton) Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for 7.5, 8.5-ton dual fuel units.
	200 MBh High Heat	Digit 4, 5, 6 = 90, 102 (7.5, 8.5 ton) Digit 10 = B (modulating gas heat) Digit 11 = H (high gas heat)	High heat modulating gas option for 7.5, 8.5-ton dual fuel units.
	150 MBh Low Heat	Digit 4, 5, 6 = 120 (10 ton) Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for 10-ton dual fuel units.
	250 MBh High Heat	Digit 4, 5, 6 = 120, 150 (10, 12.5 ton) Digit 10 = B (modulating gas heat) Digit 11 = H (high gas heat)	High heat modulating gas option for ultra-high efficiency, 10, 12.5-ton dual fuel units.
	250 MBh Low Heat	Digit 4, 5, 6 = 180, 210, 240, 300 Digit 10 = B (modulating gas heat) Digit 11 = L (low gas heat)	Low heat modulating gas option for 15, 17.5, 20, 25-ton dual fuel units.
	400 MBh High Heat	Digit 4, 5, 6 = 180, 210, 240, 300 Digit 10 = B (modulating gas heat) Digit 11 = H (high heat)	High heat modulating gas option for 15, 17.5, 20, 25-ton dual fuel units.
Secondary Heating Stages	1	Digit 11 = B, C or Digit 4, 5, 6 = 120, 150, 180, and Digit 11 = G	Heat pump, 3 to 15 Ton units, with 1-stage electric heat.
	1	Digit 10 = C	Dual Fuel, high efficiency, 3 to 5 Ton units, with Low NOx Gas Heat.
	2	Digit 10 = 0, A, and Digit 11 = E, J, K, N, P, R, L, M, H or Digit 4, 5, 6 = 072, 090, 102, and Digit 11 = G	Heat pump and dual fuel units with 2-stage electric heat or 2-stage gas heat.
Outside Air	Not Installed	Digit 14 = 0, A	No fresh air (0) installed or manual outside air (A) option.
	0 to 50% Motorized Damper	Digit 14 = B	Motorized outside air (B) option installed.
	0 to 100% Economizer	Digit 14 = C, D, E, F, G, H, K, M, P, R	100% Economizer damper installed.
Economizer Type	Dry Bulb	Digit 14 = C, D, K	Economizer cooling operation enables based on outdoor air temperature (dry bulb).
	Differential Dry Bulb	Digit 14 = R	Economizer cooling operation enables based on outdoor air temperature and space temperature difference.
	Reference Enthalpy	Digit 15 = E, F, M	Economizer cooling operation enables based on outdoor air temperature and outdoor air humidity.
	Comparative Enthalpy	Digit 15 = G, H, P	Economizer cooling operation enables based on outdoor air temperature and outdoor air humidity (enthalpy) vs. return air temperature and return air humidity (enthalpy).
Demand Controlled Ventilation	Enabled	Not applicable	Demand Controlled Ventilation is a 0 to 100% economizer damper option when a Space CO2 sensor is installed.
Demand Controlled Ventilation	Disabled	Not applicable	Demand Controlled Ventilation is disabled.
Remote Minimum Position	Not Installed	Not applicable	Not installed.
Remote Minimum Position	Installed	Not applicable	0 to 100% Economizer damper installed, or 0 to 50% motorized damper installed, and field installed remote minimum position potentiometer installed.
Space Pressure Control	Not installed	Digit 14 = 0, A, B, C, E, G	Not installed.
Space Pressure Control	Relief Fan Only	Digit 14 = D, F, H, K, M, P, R	Modulating Power Exhaust installed.
Clogged Filter	Not Installed	Digit 25 = 0, 2, 3, 6	Not installed.
Clogged Filter	Installed	Digit 25 = 1, 4, 5, 7	Clogged Filter Switch (CFS) installed.
FroStat	Installed	Not applicable	FroStat is standard.
Condensate Overflow Switch	Not Installed	Digit 25 = 0, 1, 3, 5	Not installed.
Condensate Overflow Switch	Installed	Digit 25 = 2, 4, 6, 7	Condensate Overflow Switch (COS) installed.
Supply Air Smoke Detector	Not Installed	Digit 24 = 0, A	Without smoke detector (0) or Return air smoke detector installed (A).
Supply Air Smoke Detector	Installed	Digit 24 = B, C	Supply air smoke detector installed (B) or Supply and Return air smoke detector installed (C). (Alert Note Below)
Return Air Smoke Detector	Not Installed	Digit 24 = 0, B	Without smoke detector (0) or Supply air smoke detector installed (B).
Return Air Smoke Detector	Installed	Digit 24 = A, C	Return air smoke detector installed (A) or Supply and Return air smoke detector installed (C). (Alert Note Below)
Humidistat	Not Installed	Not applicable	Not installed.
Humidistat	Installed	Not applicable	Field installed Humidistat installed.
Humidity Sensor	Not Installed	Not applicable	Not installed.
Humidity Sensor	Installed	Not applicable	Space Humidity Sensor installed.
CO2 Sensor	Not Installed	Not applicable	Not installed.
CO2 Sensor	Installed	Not applicable	Space CO2 Sensor installed.
Discharge Temperature Sensor	Not Installed	Digit 25 = 0, 1, 2, 4	Not installed.
Discharge Temperature Sensor	Installed	Digit 25 = 3, 5, 6, 7	Discharge Air Sensing (DAS) installed.
External Auto/Stop	Not Installed	Not applicable	Not installed.
External Auto/Stop	Installed	Not applicable	External Auto/Stop binary input installed, requires a Customer Options Module.
Ventilation Override	Not Installed	Not applicable	Not installed.
Ventilation Override	Installed	Not applicable	Ventilation Override installed, requires a Customer Options Module.
Alarm Indicator	Not Installed	Not applicable	Not installed.
Alarm Indicator	Installed	Not applicable	An installed Alarm Indicator requires a Customer Options Module.
Demand Management	None	Not applicable	Symbio 700 Demand Shed/Demand Limit binary input (J16) is disabled.
	Demand Limit	Not applicable	Symbio 700 binary input (J16) enables and disables energy Demand Limit function. See Demand Limit is this document.
	Demand Shed	Not applicable	Symbio 700 binary input (J16) enables and disables energy Demand Shed function. The Demand Shed is enabled, space heating and cooling setpoints will be offset 4°F (default setting).
Supply Air Tempering	Disabled	Not applicable	Disabled, Supply Air Tempering functional is disabled.
Supply Air Tempering	Enabled	Not applicable	Enabled, Supply Air Tempering function is allowed on units that are not controlled from a thermostat. Requires a discharge air sensor to be installed.
Low Ambient Cool	Not Installed	Digit 29 = 0	Not Installed. Low Ambient cooling is disabled.
	Installed	Digit 29 = Z Digit 29 = A	Installed, Low Ambient cooling function is enabled on units with a variable speed condenser fan(s).
		Digit 1 = W, D Digit 2 = S, H Digit 4, 5, 6 = 102, 120
		Digit 1 = T, Y Digit 2 = H Digit 3 = K Digit 4, 5, 6 = 120
Cabinet Size (a)	A.0 Cabinet	Digit 39 = A	Designates the equipment cabinet size. Reference the equipment model number or Tablein the application guide.
	B.0 Cabinet	Digit 39 = B
	C.0 Cabinet	Digit 39 = C
	D.0 Cabinet	Digit 39, 40 = D0
	D.1 Cabinet	Digit 39, 40 = D1
(a) See Equipment cabinet dimensions (inches) table, in the application guide, for more information.

Odyssey

The following table describes the Symbio 700 configuration and options available with reference to the Odyssey Condenser (TTA, TWA) model number and Air Handler (TWE) model number.

Configuration Item	Configuration Option	Model Number (Reference)	Description
System Type	CVZT	Air Handler Digit 15 = 1, C	Air handler, supply fan operation at 1-speed or 2-speeds, zone temperature control or thermostat control.
System Type	VVZT	Air Handler Digit 15 = D	Air handler, Variable speed supply fan zone temperature control (single zone vav).
Space Controller	Conventional TStat	Air Handler Digit 15 = 1, C, D	Equipment is being controlled from a thermostat in the space. (Digit 15 = D and System type = CVZT and Indoor Fan Type is set to Multi Speed)
	Dual Setpoint Zone Sensor	Air Handler Digit 15 = D	Dual (heating and cooling) setpoint zone sensor installed. Applicable to CVZTand VVZT System Type.
	Single Setpoint Zone Sensor	Air Handler Digit 15 = D	Single setpoint zone sensor installed. Applicable to CVZT and VVZT System Type.
Indoor Fan Type	Single Speed	Air Handler Digit 15 = 1, C	Air handler has a 1-speed supply fan motor.
	Multi Speed	Digit 15 = D	Air handler has a Variable Frequency Drive setup for 2-speed supply fan operation. (Thermostat Operation)
	Variable Speed	Digit 15 = D	Air Handler as a Variable Frequence Drive (VFD) setup for variable speed operation.
Refrigeration System	Cooling Only	Condenser Digit 1, 2, 3 = TTA	Direct expansion cooling unit with or without primary heating capacity.
Refrigeration System	Heat Pump	Condenser Digit 1, 2, 3 = TWA	Direct expansion heat pump unit with or without secondary heating capacity.
Refrigerant	R-22	Condenser Digit 7	Equipment designed for R-22 refrigerant.
	R-410A	Condenser Digit 7 = 4	Equipment designed for R-410A refrigerant.
	R-454B	Condenser and Air Handler Digit 7 = K	Equipment designed for R-454B refrigerant.
Tonnage (60 Hz)	6	Condenser Digit 4, 5, 6 = 072	Designates the equipment capacity in tons of cooling for 60Hz units.
	7.5	Condenser Digit 4, 5, 6 = 072
	10	Digit 4, 5, 6 = 120
	12.5	Digit 4, 5, 6 = 150
	15	Digit 4, 5, 6 = 180
	20	Digit 4, 5, 6 = 240
	25	Digit 4, 5, 6 = 300
Tonnage (50 Hz)	5	Condenser Digit 4, 5, 6 = 060	Designates the equipment capacity in tons of cooling for 50Hz units.
	6.25	Digit 4, 5, 6 = 076
	8.33	Digit 4, 5, 6 = 101
	10.4	Digit 4, 5, 6 = 126
	13.0	Digit 4, 5, 6 = 156
	16.7	Digit 4, 5, 6 = 201
	20.9	Digit 4, 5, 6 = 251
Refrigeration Circuit	Single	Condenser Digit 9 = 1	1 compressor, 1 line, 1 stage
	Single Manifold	Digit 9 = 2	2 compressor, 1 line, 2 stage
	Dual	Digit 9 = D	2 compressor, 2 line, 2 stage
Voltage (60 Hz)	208/230/60	Condenser Digit 8 = 3	208 Vac or 230 Vac, 60Hz, 3-phase
	380/60	Digit 8 = K	380 Vac, 60Hz, 3-phase
	460/60	Digit 8 = 4	460 Vac, 60Hz, 3-phase
	575/60	Digit 8 = W	575 Vac, 60Hz, 3-phase
Voltage (50 Hz)	380/415/50	Condenser Digit 8 = C, D	380 Vac or 415 Vac, 50Hz, 3-phase
Efficiency	Standard	Condenser Digit 14 = A (Generation A)	Efficiency Generation = A, validate by Model number digit 14 = A.
Efficiency	Standard B	Condenser Digit 14 = B (Generation B)	Efficiency Generation = B, validate by Model number digit 14 = B.
Evaporator Defrost Control	Disabled	—	Air Handler EDC (evaporator defrost control) switch is not installed.
Evaporator Defrost Control	Enabled	—	Air Handler has an installed and wired EDC switch.
Primary Heating Source	Not Installed	—	No primary heating installed.
	Electric	—	Cooling only condensing unit with primary electric heat installed in the air handler. (Note 4 Below)
	Heat Pump	Condenser Digit 1, 2, 3 = TWA	Heat Pump condenser
Primary Heating Type	Not Installed	—	No primary heat installed (Primary Heating Source = Not Installed)
Primary Heating Type	Staged	Heat Pump Condenser Digit 1, 2, 3 = TWA or Cooling Only Condenser Digit 1, 2, 3 = TWA and Air Handler has staged electric heat installed	Heat Pump Condenser or Cooling only Condenser with staged electric heat installed in the Air Handler.
Primary Heating Stages	1	—	Heat Pump Condenser or Cooling only Condenser with an Air handler 1-stage electric heat installed.
Primary Heating Stages	2	—	Cooling only Condenser with an Air handler 2-stage electric heat installed.
Secondary Heating Source (Applicable to Heat Pump Condensers)	Not Installed	—	No primary heating installed.
	Electric	—	Heat Pump Condenser with an Air handler stage electric heat installed. (Note 4 Below)
Secondary Heating Type	Not Installed	—	Heat Pump Condenser with no electric heat installed in the air handler.
Secondary Heating Type	Staged	—	Heat Pump Condenser with electric heat installed in the air handler.
Secondary Heating Stages	1	—	Heat Pump Condenser with an Air handler 1-stage electric heat installed
Secondary Heating Stages	2	—	Heat Pump Condenser with an Air handler 2-stage electric heat installed.
Outside Air	Not Installed	—	No outdoor air damper installed, or a manual damper installed.
	0 to 50% Motorized Damper	—	0 to 50% Motorized damper installed
	0 to 100% Economizer	—	0 to 100% Economizer damper installed
Economizer Type	Dry Bulb	—	0 to 100% Economizer damper installed. Economizer cooling operation enables based on outdoor air temperature (dry bulb).
	Differential Dry Bulb	—	0 to 100% Economizer damper installed. Economizer cooling operation enables based on outdoor air temperature and space temperature difference.
	Reference Enthalpy	—	0 to 100% Economizer damper installed. Economizer cooling operation enables based on outdoor air temperature and outdoor air humidity
	Comparative Enthalpy	—	0 to 100% Economizer damper installed. Economizer cooling operation enables based on outdoor air temperature and outdoor air humidity (enthalpy) vs. return air temperature and return air humidity (enthalpy).
Demand Controlled Ventilation	Disabled, Enabled	—	0 to 100% Economizer damper installed. Demand Controlled Ventilation is a 0 to 100% economizer damper option when a Space CO2 sensor is installed.
Remote Minimum Position	Not Installed	—	0 to 100% Economizer damper installed and Customer Connection Options Module not installed.
Remote Minimum Position	Installed	—	0 to 100% Economizer damper installed. Customer Connection Opti
Space Pressure Control	Not installed	—	Not installed, or Barometric Relief
Space Pressure Control	Relief Fan Only	—	Power Exhaust Fan with 0 to 100% Economizer installed.
FroStat	Not Installed	—	FroStat not installed
FroStat	Installed	Digit 15 - D	FroStat installed (High for the VFD)
Humidity Sensor	Not Installed	—	Not installed
Humidity Sensor	Installed	—	Space Humidity Sensor installed.
CO2 Sensor	Not Installed	—	Not installed
CO2 Sensor	Installed	—	Space CO2 Sensor installed.
Discharge Temperature Sensor	Not Installed	—	Not installed
Discharge Temperature Sensor	Installed	Digit 15 = D	Air Handler has a Discharge Air Temperature Sensor installed. (System type = VVZT and Space Controller = Single or Dual Setpoint Zone Sensor)
External Auto/Stop	Not Installed	—	Not installed
External Auto/Stop	Installed	—	External Auto/Stop binary input installed, requires a Customer Options Module.
Ventilation Override	Not Installed	—	Not installed
Ventilation Override	Installed	—	Ventilation Override installed, requires a Customer Options Module.
Alarm Indicator	Not Installed	—	An installed Alarm Indicator requires a Customer Options Module.
Alarm Indicator	Installed	—	Customer Options Module installed. Alarm Indicator on J10- 1, J10-2 normally open binary output.
Demand Management	None	—	Symbio 700 Demand Shed/Demand Limit binary input (J16) is disabled.
	Demand Limit	—	Symbio 700 binary input (J16) enables and disables energy Demand Limit function.
	Demand Shed	—	Symbio 700 binary input (J16) enables and disables energy Demand Shed function. The Demand Shed is enabled, space heating and cooling setpoints will be offset 4°F (default setting).
Supply Air Tempering	Disabled	—	Disabled, Supply Air Tempering functional is disabled.
Supply Air Tempering	Enabled	—	Enabled, Supply Air Tempering function is allowed.

Foundation

The following table describes the Symbio™ 700 configuration (in order) and options available with reference to the Foundation 15-25 ton model number.

Configuration Item	Configuration Option	Model Number (Reference)	Description
System Type	CVZT	Digit 15 = 7, 9	Multi-speed motor
System Type	VVZT	Digit 15 = A, B	Single Zone Variable Air Volume.
Conventional TStat	Conventional TStat	Not applicable	Equipment is being controlled from a thermostat in the space.
	Dual Setpoint Zone Sensor	Not applicable	Heating and Cooling setpoint zone sensor installed. Applicable to CVZT and VVZT System Type.
	Single Setpoint Zone Sensor	Not applicable	Single setpoint zone sensor installed. Applicable to CVZTand VVZT System Type
Indoor Fan Type	Multi Speed	Digit 15 = 7, 9	Multi-speed motor.
Indoor Fan Type	Variable Speed	Digit 15 = A, B	Single Zone Variable Air Volume.
Refrigerant	R454B	Digit 3 = K	Equipment designed for R454B.
Tonnage (60 Hz)	15	Digit 4, 5, 6 = 180	Designates the equipment capacity in tons of cooling.
	17.5	Digit 4, 5, 6 = 210
	20	Digit 4, 5, 6 = 240
	25	Digit 4, 5, 6 = 30
Refrigeration Circuit	Single Manifold	Not applicable	Not applicable
Voltage (60 Hz)	208/230/60	Digit 8 = 3	208VAC or 230VAC, 60Hz.
	460/60	Digit 8 = 4	460VAC, 60Hz.
	575/60	Digit 8 = W	575VAC, 60Hz.
Efficiency	Standard	Digit 2 = D	Standard Efficiency
Primary Heating Source	Not Installed	Digit 10 = 0	No primary heating installed.
	Electric	Digit 1 = E	Cooling only unit with primary electric heat installed.
	Electric	Digit 10 = G, N, P, R	Cooling only unit with primary electric heat installed.
	Gas	Digit 1 = G	Cooling only unit with primary staged gas heat installed.
	Gas	Digit 10 = H, L, M, X, Y, Z	Cooling only unit with primary staged gas heat installed.
Primary Heating Type	Not Installed	Digit 10 = 0	No primary heat installed.
Primary Heating Type	Staged	Digit 10 = G, N, P, R, H, L, M, X, Y, Z	Staged electric heat or staged gas heat installed.
Primary Heating Stages	1	Digit 10 = G	1-stage electric heat installed (18 kW).
Primary Heating Stages	2	Digit 10 = N, P, R, H, L, M, X, Y, Z	2-stage electric heat or staged gas heat installed.
Outside Air	Not Installed	Digit 14 = 0, A	No fresh air (0) installed or manual outside air (A) option.
	0 to 50% Motorized Damper	Digit 14 = B	Motorized outside air (B) option installed.
	0 to 100% Economizer	Digit 14 = C, D, E, F, G, H, J, L, N, S	100% Economizer damper installed.
Economizer Type	Dry Bulb	Digit 14 = C, D, J	Economizer cooling operation enables based on outdoor air temperature (dry bulb).
	Differential Dry Bulb	Digit 14 = S	Economizer cooling operation enables based on outdoor air temperature and space temperature difference.
	Reference Enthalpy	Digit 14 = E, F, L	Economizer cooling operation enables based on outdoor air temperature and outdoor air humidity.
	Comparative Enthalpy	Digit 14 = G, H, N	Economizer cooling operation enables based on outdoor air temperature and outdoor air humidity (enthalpy) vs. return air temperature and return air humidity (enthalpy).
Demand Controlled Ventilation	Enabled	Not applicable	Demand Controlled Ventilation is a 0 to 100% economizer damper option when a Space CO2 sensor is installed.
Demand Controlled Ventilation	Disabled	Not applicable	Not installed.
Remote Minimum Position	Not Installed	Not applicable	Not installed.
Remote Minimum Position	Installed	Not applicable	0 to 100% Economizer damper installed or 0 to 50% motorized damper installed and field-installed remote minimum position potentiometer installed.
Space Pressure Control	Not installed	Digit 14 = 0, A, B, C, E, G, J, L, N, S	No Barometric Relief installed.
Space Pressure Control	Relief Fan Only	Digit 14 = D, F, H	Economizer with Barometric Relief.
FroStat	Installed	Not applicable	FroStat is standard.
Condensate Overflow Switch	Not Installed	Digit 25 = 0	Not installed.
Condensate Overflow Switch	Installed	Digit 25 = A	Condensate Overflow Switch (COS) installed.
CO2 Sensor	Not Installed	Not applicable	Not installed.
CO2 Sensor	Installed	Not applicable	Space CO2 Sensor installed, required for demand controlled ventilation.
Discharge Temperature Sensor	Not Installed	Not applicable	Not installed.
Discharge Temperature Sensor	Installed	Not applicable	Discharge Air Sensing (DAS) installed.
External Auto/Stop	Not Installed	Not applicable	Not Installed.
External Auto/Stop	Installed	Not applicable	External Auto/Stop binary input installed, requires a Customer Options Module.
Ventilation Override	Not Installed	Not applicable	Not Installed.
Ventilation Override	Installed	Not applicable	Ventilation Override installed, requires a Customer Options Module.
Alarm Indicator	Not Installed	Not applicable	Not installed.
Alarm Indicator	Installed	Not applicable	Alarm Indicator requires a Customer Options Module binary output.
Demand Management	None	Not applicable	Symbio 700 Demand Shed/Demand Limit binary input (J16) is disabled.
	Demand Limit	Not applicable	Symbio 700 binary input (J16) enables and disables energy Demand Limit function. See Demand Limit is this document.
	Demand Shed	Not applicable	Symbio 700 binary input (J16) enables and disables energy Demand Shed function. The Demand Shed is enabled and space heating and cooling setpoints will be offset 4° F (default setting).

Application Guide

Click the link below to find the latest version of the Application Guide

IOM Links

Click the link below to find the latest version of the IOM

Notes

Note 1: A complete configuration will be required during a Symbio 700 Unit Controller replacement if you do not have a backup file to restore. All the configuration items must be selected.

Note 2: These options—Economizer, Relief Fan (Power Exhaust), Clogged Filter Switch, and Condensate Overflow Switch—may be field‑installed. If they are not shown in the model number, confirm whether they are present when setting up the unit controller.

Note 3: Equipment can be configured through the Tracer TU, the mobile service tool, or the onboard display.

Note 4: When placing the Electric Heat configuration to "Installed", an Indoor Options Module is required. Not required on 3-5 Ton units.

Backup and Restore

Symbio™ 700 - Backup and Restore your configurations and settings

Replacing Unit Controller

Symbio™ 700 - Replacing a Unit Controller Module

External Smoke Detector

Symbio™ 700 - Emergency Stop or Equipment Shutdown Input

WARNING:

Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.

Configuration Program

Phone App Download Link

Configuration Tables

Application Guide

IOM Links

Notes

Articles in this section

Related articles