Issue:
LCI-R Not Reading the Discharge Air Temp Sensor
Where do you connect the ReliaTel discharge air temp sensor?
Supply air temperature is -40
Resolution:
The Discharge Air temperature connects to the RTOM board J4-4 and J4-5, 10K type 2 thermistor
For Voyagers with Reliatel controls and TCI communications, the Discharge Air temperature is reported from the MAT input on the ECA module, not J4 on the RTOM.
LCI-R
Check SNVT with Rover to see if the unit is providing a valid reading through nvoDischAirTemp
SNVT is a Hex value, Convert the value to decimal, then subtract 65536 from it, then divide it by 100 to get C. Mulitply it by 9, divide it by 5 and add 32 to convert to F.
7FFF = invalid/undefined temperature value
Other Question/Problem/Cause Statements:
- LCI-R Not Reading the Discharge Air Temp Sensor
- Where do you connect the ReliaTel discharge air temp sensor?
- Supply air temperature is -40
- ReliaTel discharge air temp sensor
- ReliaTel supply air temp sensor
HUB DOC: Where do you connect the ReliaTel discharge air temp sensor?
HUB DOC: Supply air temperature is -40