TD5 setting up for data collection
Summary:
Remember to consider and specific requirements or guidelines for your project, such as accuracy standards, data collection protocols, or any additional configuration settings that may be relevant to your specific use case
- Locate and press the settings button on the TD5 display.
- Locate and press the Date/Time button on the display screen. Once on this screen please set the correct date and time for your location. Be sure to indicate ‘A.M.’ or ‘P.M’.
- Next, go back to the Settings page and locate the Display Preference button and press it.
- Then navigate to Page 2. Press the Collection Frequency button. Make sure collection frequency is 30 seconds (3.5 Days)
- Once you have completed these steps the TD5 will collect data.
WARNING:
Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.