Symbio 700 - Restore to Factory Defaults
Summary
The Symbio App allows you to reset the Symbio 700 board to factory defaults only if it is the original from the factory. This operation can be performed through the Symbio App. If the board has been replaced, no factory default setting is present, and the board will have to be manually configured. The illustration shows the steps to reset the board to factory default through the App.
Restore
- In the Symbio App, navigate to the Tools menu
- Select the Restore item from the menu
- Select the Restore Factory Defaults
- Press the Restore Factory Defaults icon
Where to download the Service & Installation Mobile Phone App - link below
WARNING:
Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.