This document is intended for use with the Trane Comm4 Rover Adapter (Serial Gear USB-COMi-M). Other RS485 adapters will work, but you will need to follow the manufacturers driver installation to allow it work work on your computer. Other steps are the same.
To download the latest version of the EC Control software, visit the EBM site here: EC-Control Version 3.50 download
Then follow the instructions in the attachment below.
WARNING:
Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.