Issue:
Retrofitting RTAA and RTWA chillers with LonTalk
Resolution:
LonTalk Communication Interface for Chillers (LCI-C) is available for all RTAA 70-125, RTWA and RTUA chillers with the UCM control interface. The Unit Control Module is the clear language display utilized on these 70-125 ton chiller models.
Due to the nature of this control platform, the LCI-C card can be retrofitted into any of these chillers. The exception would be a chiller with the remote display panel option installed with which this option is mutually exclusive.
1U8 part number KIT12182
Installation guide PART-SVN92A-EN
See ACC-SVN32A-EN for part numbers and installation instructions.
Notes:
RTAA 130-400, these chillers use comm3 as highest level of communication (1U2 module) to communicate to a Tracer BCU; Not possible to do LonTalk.
Changes:
Other Question/Problem/Cause Statements:
- Adding LCI to RTAA?
- Retrofitting RTAA130-400 TON chillers with Lon Talk?
- Retrofitting RTAA and RTWA chillers with LonTalk
Facts:
- RTAA 70-125 Ton (Pueblo)
- RTUA
- RTWA
- Air-Cooled Chiller (Pueblo) (RTAA 70-125 Ton)
- Compressor Chiller (Pueblo) (RTUA)
- Water-Cooled Chiller (Pueblo) (RTWA)
Document Identifier: DOC-77684
Document Identifier: 77684
Click the e-library symbol for the latest version
WARNING:
Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.