Issue:
Does the washer for the LLS need to be installed in a specific orientation?
Resolution:
- The washer on the Sporlan Liquid Level sensor is a "crush washer" that is cupped.
- It is not direction sensitive on how it is installed.
- Basically, it is just a gasket.
Note: This is not applicable for the GEMS LLS.
Other Question/Problem/Cause Statements:
- Does the washer for the LLS need to go in direction specific?
Document Identifier: DOC-83372
Information in this article is intended for use by individuals possessing adequate backgrounds of electrical and mechanical experience and who comply with all federal, state, and local laws, rules, orders, or regulations related to the installation, service, or repair of a heating or central air conditioning product. Any attempt to install, service, or repair a heating or central air conditioning product may result in personal injury and/or property damage. The manufacturer or seller cannot be responsible for the interpretation of the information contained herein, nor can it assume any liability in connection with its use.